Click Here For A Technical Drawing & Model Information

Note: The above link is an Adobe Acrobat file. If you do not have the Adobe Acrobat Reader, then you can download it by clicking the logo.

• Container body is constructed of 3/16" A36 carbon steel plate with structural angle frame and structural steel base.
• Base is equipped with trunnion tracks and rocker stops for smooth operation and alignment. Base is designed for forklift handling.
• Container is locked in position while filtering by a safety release latch. When emptying the load in the container, unit is tilted back, then safety latch is released, unit is tilted forward and container rocks forward to dump its contents. Tilting the unit back again assists in returning it to its latched position.
• Has internal support panels, to which filter media is attached.
• Two - 2" female threaded drainage ports are provided on the container body below the bottom position of the interior support panel.
• Exterior and interior surfaces of container and support basket will be sandblasted, 2-part epoxy primed, and upper coated with polyurethane.

---

Basic Style

Container filter support panels are load support for the filter media and are constructed of 1/4" carbon steel perforated plate (1/4" hole on 3/8" center). A wide range of filter media is available for this style. Filter media with back-up material is contour fitted onto a support panel and secured in place with retainer bars, stainless steel socket set screws with fender washers, and acorn nuts. Filter support and filter media cover the floor of container. A pump can be used to pull a vacuum on cavity below filter support. Filter supports are removable for cleaning of container.

Container filter panels are load support for the filter media and are constructed of 1/4" carbon steel perforated plate (1/4" hole on 3/8" center). A wide range of filter media is available for this style. Filter media with back-up material is contour fitted onto a support panel and secured in place with retainer bars, stainless steel socket set screws with fender washers, and acorn nuts. Filter support and filter media cover the floor of container. A pump can be used to pull a vacuum on cavity below filter support. Filter supports are removable for cleaning of container.

Container filter support panels are load support for the filter media and are constructed of 1/4" carbon steel perforated plate (1/4" hole on 3/8" center). A wide range of filter media is available for this style. Filter media with back-up material is contour fitted onto a support panel and secured in place with retainer bars, stainless steel socket set screws with fender washers, and acorn nuts. Filter support and filter media cover the floor and part of side and back walls of container. Side and back wall filters drain into a cavity separated from the cavity to which the bottom filters drain. This allows sludge to dewater by gravity through side and back wall filters while a pump is used to pull a vacuum on the bottom filter. Additional set of 2" FNPT threaded drainage ports is provided to drain the side and back wall filters. Filter supports are removable for cleaning of container.