Click Here For A Technical Drawing & Model Information

Note: The above link is an Adobe Acrobat file. If you do not have the Adobe Acrobat Reader, then you can download it by clicking the logo.

• Container walls are constructed of 10-gauge carbon steel plate, with floor constructed of 7-gauge carbon steel plate.
• Walls and floor are reinforced by structural angle and formed channel framing.
• Has internal support panel(s) to which filter media is attached.
• Two - 2" female threaded drainage ports are provided on the container body below the bottom position of the interior support panel.
• Designed to be unloaded by a standard "rear loader" type waste truck.
• Exterior and interior surfaces of container and support basket will be sand blasted, 2-part primed, and upper coated with polyurethane.

---

Basic Style

Container filter support panels are load support for the filter media and are constructed of 1/4" carbon steel perforated plate (1/4" hole on 3/8" center). A wide range of filter media is available for this style. Filter media with back-up material is contour fitted onto a support panel and secured in place with retainer bars, stainless steel socket studs with fender washers, and acorn nuts. Filter support and filter media cover the floor of container. A pump can be used to pull a vacuum on cavity below filter support. Filter supports are removable for cleaning of container.

Standard Style

Container filter panels are load support for the filter media and are constructed of 1/4" carbon steel perforated plate (1/4" hole on 3/8" center). A wide range of filter media is available for this style. Filter media with back-up material is contour fitted onto a support panel and secured in place with retainer bars, stainless steel socket set screws with fender washers, and acorn nuts. Filter support and filter media cover the floor and part of back wall of container. Back wall filter drains into bottom cavity. A pump can be used to pull vacuum on cavity below filter support. Filter supports are removable for cleaning of container.

Gravity/Vacuum Style

Container filter support panels are load support for the filter media and are constructed of 1/4" carbon steel perforated plate (1/4" hole on 3/8" center). A wide range of filter media is available for this style. Filter media with back-up material is contour fitted onto a support panel and secured in place with retainer bars, stainless steel socket set screws with fender washers, and acorn nuts. Filter support and filter media cover the floor and part of side and back walls of container. Side and back wall filters drain into a cavity separated from the cavity to which the bottom filters drain. This allows sludge to dewater by gravity through side and back wall filters while a pump is used to pull a vacuum on the bottom filter. Additional set of 2" FNPT threaded drainage ports is provided to drain the side and back wall filters. Filter supports are removable for cleaning of container.