| Container
Filter - Roll Off Style Sludge Mate® - Specifications
Click
Here For A Technical Drawing & Model Information
Note:
The above link is an Adobe Acrobat file. If you do not have the Adobe Acrobat
Reader, then you can download it by clicking the logo.
|
|
- Container is constructed of A-36 carbon steel plate with
7-gauge floor and 10-gauge walls.
- Two 3" drainage ports are located on each side for gravity
drainage or pump suction.
- Door of container is made of 3/16" A-36 plate with door
frame perimeter made of 4" x 3" x 3/16" tubing and door frame interior made
of 3/16" plate channels. All parts of door are continuously welded. Door sealing
face will be totally watertight and have an EPDM gasket on the surface area.
- Hinges are constructed of 1/2" wall steel tubing and 1"
diameter hot rolled bar pins with welded retainer washers.
- Rails are constructed of 6" x 2" x 3/6" structural tubing
with 36-1/2" inside spacing.
- Floor is framed over 3" channel cross members and end
members, and welded as a one-piece floor and beam system.
- Container is seal welded on all interior surfaces and
seal welded on top of all exterior surfaces.
- Exterior and interior surfaces are sandblasted, 2-part
epoxy primed and upper coated with polyurethane.
|
Houston