| Container
Filter - Side Loader Model - Specifications
Click
Here For A Technical Drawing & Model Information
Note:
The above link is an Adobe Acrobat file. If you do not
have the Adobe Acrobat Reader, then you can download it
by clicking the logo.
|
|
- Container walls are constructed of 10-gauge
carbon steel plate, with floor constructed of 7-gauge carbon
steel plate.
- Walls and floor are reinforced by structural
angle and formed channel framing.
- Has internal support panel(s) to which
filter media is attached.
- Two - 2" female threaded drainage ports
are provided on the container body below the bottom position
of the interior support panel.
- Designed to be unloaded by a standard
"side loader" type waste truck.
- Exterior and interior surfaces of container
and support basket will be sand blasted, 2-part primed,
and upper coated with polyurethane.
Basic Style
Container filter support
panels are load support for the filter media and are constructed
of 1/4" carbon steel perforated plate (1/4" hole on 3/8" center).
A wide range of filter media is available for this style.
Filter media with back-up material is contour fitted onto
a support panel and secured in place with retainer bars, stainless
steel socket set screws with fender washers, and acorn nuts.
Filter support and filter media cover the floor of container.
A pump can be used to pull a vacuum on cavity below filter
support. Filter supports are removable for cleaning of container.
Standard
Style
Container filter panels
are load support for the filter media and are constructed
of 1/4" carbon steel perforated plate (1/4" hole on 3/8" center
A wide range of filter media is available for this style.
Filter media with back-up material is contour fitted onto
a support panel and secured in place with retainer bars, stainless
steel socket set screws with fender washers, and acorn nuts.
Filter support and filter media cover the floor and part of
back wall of container. Back wall filter drains into bottom
cavity. A pump can be used to pull vacuum on cavity below
filter support. Filter supports are removable for cleaning
of container.
Gravity/Vacuum
Style
Container filter
support panels are load support for the filter media and are
constructed of 1/4" carbon steel perforated plate (1/4" hole
on 3/8" center A wide range of filter media is available for
this style. Filter media with back-up material is contour
fitted onto a support panel and secured in place with retainer
bars, stainless steel socket set screws with fender washers,
and acorn nuts. Filter support and filter media cover the
floor and part of side and back walls of container. Side and
back wall filters drain into a cavity separated from the cavity
to which the bottom filters drain. This allows sludge to dewater
by gravity through side and back wall filters while a pump
is used to pull a vacuum on the bottom filter. Additional
set of 2" FNPT threaded drainage ports is provided to drain
the side and back wall filters. Filter supports are removable
for cleaning of container.
|
Houston