Poly-Mate® Polymer Mixing and Injection System

PolyMate1000.png
PolyMate500.png
PolyMate2000.png
PM-3000B Explosion Proof (2).jpg
PolyMate250.png
poly-mate-model 250 GPM-polymer-mixing-injection-system.jpg
poly-mate-model-GPM 3000-polymer-mixing-injection-system.jpg
poly-mate-model-1000-GPM-polymer-mixing-injection-system.jpg
sludge-mate-small-poly-mate-dewatering-container-filter-box-wastewater-treatment (1).png
poly-mate-model 4000 GPM-polymer-mixing-injection-system-municipal.jpg
poly-mate-model-5000-polymer-mixing-injection-system-jet-shear-sharing-dry-liquid.jpg
PolyMate1000.png
PolyMate500.png
PolyMate2000.png
PM-3000B Explosion Proof (2).jpg
PolyMate250.png
poly-mate-model 250 GPM-polymer-mixing-injection-system.jpg
poly-mate-model-GPM 3000-polymer-mixing-injection-system.jpg
poly-mate-model-1000-GPM-polymer-mixing-injection-system.jpg
sludge-mate-small-poly-mate-dewatering-container-filter-box-wastewater-treatment (1).png
poly-mate-model 4000 GPM-polymer-mixing-injection-system-municipal.jpg
poly-mate-model-5000-polymer-mixing-injection-system-jet-shear-sharing-dry-liquid.jpg

Poly-Mate® Polymer Mixing and Injection System

1.00

Poly-Mate® Polymer Mixing and Injection System is used for either liquid or dry polymer mixing and injection.

Add To Cart


Poly-Mate®  Polymer Injection Systems can be used for either liquid or dry polymer mixing and injection.

Poly-Mate® models 250 through 2000 are designed to be used with liquid polymer, which is manually added to the batch tank. An electric agitator is used for dispersing and blending the neat polymer with water. The dilute solution is then injected via pump into the Mix Mate manifold producing uniformly flocculated sludge ready to be dewatered.

All Poly-Mates incorporate the patented Mix Mate manifold for blending of sludge with polymer.


Available Models

poly-mate-205 GPM-polymer-mixing-injection-system-pump-dewatering-sludge

Model 250

Tank with agitator separated from injection pump skid - for low sludge flows (up to 100 GPM). 

poly-mate-500 GPM-polymer-mixing-injection-system-pump-sludge-dewatering

Model 500

Tank with agitator separated from injection pump skid for ease of placement in tight locations. For 100-200 GPM sludge flows.

poly-mate-1000 GPM-polymer-mixing-injection-system

Model 1000

All components are skid mounted, including batch tank and agitator.

poly-mate-2000 GPM-polymer-mixing-injection-system-sludge-dewatering

Model 2000

All components are skid mounted including two batch tanks. This model allows for the continuous delivery of dilute polymer. 

poly-mate-3000 GPM-polymer-mixing-injection-system-pump-filter-wastewater

Model 3000

Skid mounted unit with dual tanks, transfer pump, level controls, and neat polymer pump for the automatic continuous mixing and injection of liquid polymer. 

poly-mate-4000 GPM-polymer-mixing-injection-system-jet-shear-batch-tank

Model 4000

Designed for use with dry polymer this skid-mounted model includes a single agitated batch tank, Jet Shear II, hopper, eductor and recirculation pump. Dry polymer is manually added through a mixing hopper. 

poly-mate-GPM 5000-polymer-mixing-injection-eductor-hopper-jet-shear-tank-skid-mount

Model 5000

This two-tank skid mounted unit with Jet Shear II, hopper, eductor, and recirculation pump allows for the continuous mixing and injection of dry polymer. The polymer is manually added through a mixing hopper.