Permanently mounted or removable Vertical Panel Filters make a Retrofit for all conventional size roll-off containers. These units have also been used in dump truck beds and sumps.

• Rapid dewatering and separation of flocculated sludges.
• Inexpensive alternative to standard container filter.
• Vacuum enhanced drainage.
• Custom applications.
• Wide selection of filter media and mesh (micron) sizes.

Flo Trend's^® simply designed Retrofit Vertical Panel Filter will convert any conventional watertight container or dump truck into an efficient and effective dewatering and separating container. This conversion can be made with little or no change to your existing inventory by providing two outside drainage ports on the container body for the clarified water. When connected by hose or pipe to the drainage ports on the Retrofit Vertical Panel Filters, liquid can pass through the filters and out of the container. A hose yoke and vacuum pump may be used with the Retrofit Panel Filter without any alterations to the container. The Retrofit Vertical Panel Filters are secured in place in the container using either the clamp, turnbuckle, and ratchet kit or the rigid side to side top tail attachment kit. Either installation allows the panels to remain in the container when dumping, or they can be unfastened and removed prior to dumping.

This filter system can be used with Flo Trend's^® Poly Mate^® polymer mixing and injection unit to dewatered flocculated sludge, i.e. grease trap septic tank, digester sludge, alum sludge, etc.